Products

eX-SERIES

  • Gas change time is improved by 60% over previous model, only 10 minutes from start up time.
  • Helical Rack and Pinion reduces noise, and allows for an increase in acceleration in X and Y axes and provides increased accuracy and longer life time
  • Magnetic Head is standard on 45 CF-R Model, allowing for quicker recovery after collision
  • Built in Jet Pierce provides the ability to aggressively pierce mild steel.
  • New Mitsubishi Control with Faster graphical interface, USB compatibility and expanded programming options.
On Screen Graphics Program Trace:
01
Diamond Path Constant Beam Length:
01
Automatic Nozzle Change:
01
On screen graphic
01
Aluminium 6062 Cutting at 40 IPM:
01
‘0.250” Stainless 304 Cutting at 90 IPM:
01
‘0.250” Hot Rolled P&O Cutting at 126 IPM:
01
‘0.250” Aluminium 6062 Cutting at 80 IPM:
01
‘0.187” Hot Rolled P&O Cutting at 160 IPM:
01
‘0.125” Stainless 304 Cutting at 215 IPM:
01
‘0.125” Aluminium 6062 Cutting at 210 IPM:
01
‘0.060” Stainless 304 Cutting at 400 IPM:

SPECIFICATION
Processing Machine Specifications
Model Ex
Machine structure X/Y - Precision Rack & Pinion - Z=Precision Ball Screw
Travel drive method X-Y-Z simultaneous 3 axes (Z axis height control is also possible)
Max. workpiece size (inch) 120.1 x 60.0 (3050mm x 1525mm)
Table pass height 34.6 (879mm)
Processing access Automatic Up/Down Door
Pallet changer Provided
X-axis stroke (inch) 122 (3,100 mm)
Y-axis stroke (inch) 61 (1,550 mm)
Z-axis stroke (inch) 5.9 (150 mm)
Rapid travel speed (X, Y) (inch / min) 3940 (100m/min) 5550 (141m) simultaneous
Max. processing feedrate (inch / min) 1970 (50m/min)
Positioning precision (inch) 0.0019/20 (0.05/ 500mm) (X, Y axis), 0.0039/4 (0.01/ 100mm) (Z axis)
Drive motor type Intelligent AC Servo
Max. workpiece weight (lb) 2050 (930 kg)
Machine unit dimensions (W x H x D) (inch) 428.6 x 111.4 x 127.8
(10,886 x 2,830 x 3,246 mm)
Machine system weight (lb) 28090
Machine power requirements 77 KVA
3Ø 208 VAC ±5% 60Hz
220 Full Load Amps
CO2 Laser Specifications
Model 35CF-R 45CF-R
Excitation method 3-axis cross flow, silent ischarge 3-axis cross flow, silent discharge
Maximum output power (W) 3500 4500
Rated output power (W) 3500 4500
Control method Power feedback Power feedback
Power stability Less than ±1% of rated power Less than ±1% of rated power
Beam mode Low-order (main component TEM01*) Low-order (main component TEM01*)
Beam outer diameter (inch) 1.02 (26 mm) 1.02 (26 mm)
`Beam divergence (mrad) Approx. 3.5 or less (total angle) Approx. 3.5 or less (total angle)
Laser gas composition CO2:CO:N2He 8:4:60:28 8:4:60:28
Laser gas consumption rate (liter/Hr) 3 3
Gas sealing time (during rated continuous oscillation) (Hr) 24 (during rated continuous oscillation) 24 (during rated continuous oscillation)
Wave length (μm) 10.6 10.6
Frequency setting range (Hz) 10~3000 10~3000
Duty range (%) 0~100 adjustable 0~100 adjustable
Output power adjustable range (%) 0~100 of rating 0~100 of rating
Resonator unit dimensions (W x H x D) 98.4 x 71.3 x 31.5 (2,500 x 1,800 x 800 mm) 98.4 x 71.3 x 31.5 (2,500 x 1,800 x 800 mm)
Resonator unit weight (lb) 4850 (2,200 kg) 4850 (2,200 kg)
Chiller power requirements 42 KVA
3Ø 208 VAC ±10% 60Hz
129 Full Load Amps		 42 KVA
3Ø 208 VAC ±10% 60Hz
129 Full Load Amps

eX SERIES

 

Find a Product

Contact Sales

North & East Region

South Region

West Region